345V 200AH EV Battery Pack, Lithium Ion Batteries 70kwh 100kwh For Electric Car
Parameters of 345v 210Ah Lifepo4 battery pack
Working Voltage range(DC V)
Continuous discharge current(A)
Peak discharge current(A)
For 30 seconds
Standard charge current(A)
Max charge current(A)
Dimension (L/W/H, mm)
>>> Lightweight and scalability <<<
CTS systematically optimizes the cell design and electrical component selection. We select the lightest steel/aluminum alloy and high-strength plastics,battery box and pack structure to reduce the volume and weight of the battery system combined with CAE structural simulation analysis to ensure structural strength and improve energy density. CTS uses standardized cells and BMS to build a 12V 24V 48V 72V battery modules. It can need different customer’s requirements by its excellent scalability to shorten the pack design cycle.
>>> BMS and Active Balance <<<
CTS has an experienced BMS development team. Our BMS uses passive balance by default. Active balance can be selected which can modify BMS parameters on site according to the actual application of customers, such as CAN / RS485 communication protocol, threshold parameters such as over / under voltage protection, high current protection, over / under temperature protection.
>>> Thermal Management and Simulation Design <<<
CTS has the capabilities of CFD simulation (Computational Fluid Dynamics) and CAE simulation (Computer Aided Engineering), and can do thermal management simulation design and structural mechanics simulation design for the pack system. Air cooling system, liquid heat and liquid cooling system, PI film heating, silica gel film heating are used in the thermal management design.