CTS High power 144V 100ah 200ah 300ah 400ah rechargeable EV battery, NCM lithium battery for electric car 200v 300v 400v
Dimensions
Deatails
Parameters of 144v 100Ah NMC battery pack
No.
Items
Technical requirement
Note
1
Battery Type
NMC
20S
2
Capacity(Ah)
100
@25℃
3
Volatge
144
4
Power(kWh)
14.4
5
Weight(kg)
130.5
6
Working Voltage range(DC V)
120-168
7
Continuous discharge current(A)
100
@EOL,@25℃
8
Peak discharge current(A)
200
For 30 seconds
9
Dimension (L/W/H, mm)
Irregular
Core technologies
>>> Lightweight and scalability <<<
CTS systematically optimizes the cell design and electrical component selection. We select the lightest steel/aluminum alloy and high-strength plastics,battery box and pack structure to reduce the volume and weight of the battery system combined with CAE structural simulation analysis to ensure structural strength and improve energy density. CTS uses standardized cells and BMS to build a 12V 24V 48V 72V battery modules. It can need different customer’s requirements by its excellent scalability to shorten the pack design cycle.
>>> BMS and Active Balance <<<
CTS has an experienced BMS development team. Our BMS uses passive balance by default. Active balance can be selected which can modify BMS parameters on site according to the actual application of customers, such as CAN / RS485 communication protocol, threshold parameters such as over / under voltage protection, high current protection, over / under temperature protection.
>>> Thermal Management and Simulation Design <<<
CTS has the capabilities of CFD simulation (Computational Fluid Dynamics) and CAE simulation (Computer Aided Engineering), and can do thermal management simulation design and structural mechanics simulation design for the pack system. Air cooling system, liquid heat and liquid cooling system, PI film heating, silica gel film heating are used in the thermal management design.